SIIG 04-0629A manual Windows ME / 98SE / 98, Type edit autoexec.bat, and press Enter

Page 10

Windows ME / 98SE / 98 / 95

1.Right click My Computer, click Properties, click Device Manager.

2.Double click Ports (COM & LPT), and one M65-PCI ECP Parallel Port... two M65-PCI Serial Port...

should be listed.

1.Insert the driver CD. From the C:\> prompt, type copy D:\dos\*.*, and press Enter. (Change D: to match your CD-ROM drive letter)

3.Add C:\Gemdosin.exe -a-rat the bottom of the Autoexec.bat file.

4.Go to File, save the changes and exit.

5.Restart your system for the new setup to take effect.

Image 10

Contents Serial interface Features and BenefitsIntroducing the 2S1P Combo-Value Parallel interfaceSystemRequirements PackageContentsLayout Hardware Installation Windows Vista 32-/64-bit Driver InstallationWindows 7 32-/64-bit Click Browse my computer for driver softwareWindows XP 32-bit Windows XP 64-bitWindows Server 2003 64-bit Windows Server 2003 32-bitAt the Found New Hardware Wizard Windows Server 2008 64-bit Windows Server 2008 32-bitWindows2000 Windows 98SE At the Update Device Driver Wizard, click NextWindows ME WindowsTo Verify Windows Installation Windows 7 32-/64-bitWindows ME / 98SE / 98 Type edit autoexec.bat, and press EnterTechnical Support and Warranty SIIG, Inc Stewart Avenue Fremont, CA 94538-3152, USA RMA #About SIIG, Inc