SIIG 101828 instruction manual Windows XP

Windows XP

To check your port settings in Windows XP, do the following:

1.Go to “Start”.

2.Choose “Control Panel”.

3.Choose “Administrative Tools”.

4.Choose “Computer Management”

5.Double click “Device Manager” in the left quadrant.

6.Double click “Ports (COM & LPT)” icon in the right quadrant.

7.Double click “Printer Port (LPT1)” icon in the right quadrant.

8.Click the “Resources” tab.

This will display the port settings for LPT1 where the FlashLink can be accessed. They should look something like “0378-037F”, write down “0378”.

Then start your FlashLink Software and select from the top menu “Customize”. Then click the “Set Port” button. You will see the port-setting value that FlashLink Software is using in the “Base Address” field. Put the port-setting value that you wrote down from the above instructions into the “Base Address” field.

Page 12