Setting up and connecting
Activating the remote control battery
The remote control battery is already inserted when delivered.
¡Activate the battery by removing the isolation strip.
Changing the remote control battery
¡Press, with the fingernail, the recess (A) to the right and, at the same time, pull the battery compartment out.
¡Insert a 3 V battery type CR 2032 in the battery compartment. The side with the marking "+" points upwards.
¡Slide the battery compartment completely back into the remote control.
Providing mains power
¡Place the device approx. 40 to 50 cm away from your head (i.e. on the bedside table).
¡Plug the mains power plug into a wall socket. In the display 4 the time of day (0:00 o'clock) and the temperature will be shown.
VHF wire antenna
¡For VHF reception completely unfold the wire antenna 24.
Connecting the headphones
¡If required you can connect headphones (with a 3.5 mm jackplug) to the connection socket 21 on the rear panel of the device. The speakers then switch off automatically.
GB
IE
KH 2600 | 13 |