GB
IE
Handling and operation
Reading lamp
You can use the device as a reading lamp.
¡Press the 
button 19 on the device or on the remote control to switch the lamp on and off.
¡Press the 
/
button to set the brightness. The symbol 
and the light intensity (00 to 20) are shown in the display 4 .
NOTICE
►If you have set the light intensity to 00 you can, by all means, set a higher
value, the lamp remains, however, switched off and must be switched back
on via the 
button 19 on the device or on the remote control.
►The light intensity that you have selected will also be saved automatically as the light intensity for the wake function.
Replacing the halogen lamp
The halogen lamp 2 must be replaced if it is defective or the light intensity decreases.
DANGER
Risk of fatal electrocution!
►Pull the plug from the mains socket before you change the halogen lamp 2 .
NOTICE
►The halogen lamp 2 must only be replaced with one of the same lamp type: E27 42 W.
¡Turn the lamp housing 
in the direc- tion of the arrow and lift it upwards.
¡Unscrew the defective halogen lamp from the lamp socket.
¡Screw a new 42 W halogen lamp into the lamp socket.
¡Place the lamp housing 
carefully from above and turn it in the opposite direction to the arrow to attach.
20 | KH 2600 |