GB
IE
Handling and operation
Handling and operation
In this chapter you receive important information for the handling and operation of the device.
Switching On and Off
¡Press the 
/ALARM OFF button 20 or the 
button on the remote control to switch the device on. The display 4 is activated.
¡Press the 
/ALARM OFF button 20 or the 
button on the remote control to switch the device off. In the display 4 is shown the time of day, the temperature and a programmed alarm time (Standby mode).
NOTICE
►The 
/ALARM OFFbutton 20 does not completely disconnect the device from the mains power. To completely disconnect the device from the mains power the mains power cable plug 23 must be pulled from the mains socket.
Setting the time
Prerequisite: The device is in standby mode.
¡Press the MEMORY/TIME button 17 or the TIME button on the remote control. The hour indicator in the display 4 blinks.
¡Press the SLEEP button 14 for approx. 2 seconds to switch between the 12h/24h time of day display.
¡Set, with the ►►I button 11 or the I◄◄ button 13 , the current time of day hour. With each button press the time changes by one hour. Holding down the respective button for more than 2 seconds starts the speed setting.
¡Press the MEMORY/TIME button 17 or the TIME button on the remote control. The minute indicator in the display 4 blinks.
¡Set, with the ►►I button 11 or the I◄◄ button 13, the current time of day minutes. With each button press the time changes by one minute. Holding down the respective button for more than 2 seconds starts the speed setting.
¡Press the MEMORY/TIME button 17 or the TIME button on the remote control to confirm the time input or wait for approx. 7 seconds after which the time input will be automatically confirmed.
NOTICE
►The time of day will revert back to 0:00 o'clock if the device is disconnected from the mains power supply with no
14 | KH 2600 |