Simplicity 1726793, 1694498 manual Initial Collector, Assembly, Install Cover and Bags

		Initial Collector
		Assembly
COLLECTOR ASSEMBLY		A
Install Cover and Bags
		B
		C
1.	Hang the bags (F, Figure 7) on the horizontal sup-
	port.
Note: If desired, the bags can be lined with 30 gallon
	trash bags for easy disposal.
2.	Install the handle (B) inside the cover. Secure with
	two #10-32 x 1/2 screws (C) and nuts (A).
3.	Rest the cover assembly (D) on the bags (F).
4.	Install the two hinge pins (E) and secure with hair pin
	clips (G).	D
5.	Open the cover and fasten cable (A, Figure 8) to sup-	E
	port (B). The looped cable end fits over washer (C).
NOTE: Push the hair pin clips all the way on or they will
be bent by the hinge when the cover is opened.		G
		F

Figure 7. Install Catcher
A. Nut, #10-32	E. Hinge Pin
B. Handle	F. Bags
C. Screw, #10-32 x 1/2	G. Hair Pin Clip
D. Cover

A

B

C

Figure 8. Install Cable

A. CableC. Washer

B. Support

13