Sharper Image SN004 manual Weather Station, Backlight

Page 13

Setting the Clock

Note: If in 12-hour mode, a.m. or p.m. appears. Daily alarm sound can be identified by short, rapid beeps. When the alarm is beep- ing, you can turn it off by pressing any button, except the SNOOZE button, on the back of the clock for 2 seconds. To snooze, press any button located on the back of the unit. Duration is 5 minutes.

Backlight

To illuminate the LCD on the main clock unit, press the SNOOZE/ LIGHT button. To illuminate the Weather Station, press the LIGHT button on that back of the unit.

Weather Station

The Weather Station is capable of detecting atmospheric pressure changes. Once the batteries have been installed, the LCD shows all the segments for a few seconds, then changes to show the humidity and the temperature. The pressure display shows (blank) “---- - 0h.”

The weather forecast area is blank. The blinking arrows inside the window at the upper left corner indicate that the pressure is cur- rently being read. Once this instrument successfully receives the pressure data, it displays the barometric pressure reading on the LCD, as well as the corresponding weather forecast icon.

13

Page 12 Page 14
Image 13
Page 12 Page 14
Contents Hadrons Desktop Atomic Clock Weather Station Page Page Table of Contents What isHeadAtomicH1Radioor H2Control? Back view of clock What is Atomic Radio Control? Parts DiagramHeadBatteriesH1 or H2 Setting the Atomic Time and DateHow to position the clock for the best signal reception Setting theHeadAtomicH1 orTimeH2and Date Setting the Clock Setting the Current Date Setting the ZoneSetting the Alarm Setting the Current TimeBacklight Weather StationWeatherHdH1Stationor H2 Reading the Barometric Pressure Weather Station Reading the Humidity Reading the TemperatureWeather Station Page What Is Covered Warranty
Top Page Image Contents