Sharper Image SN004 manual Setting the Current Time, Setting the Alarm

Page 12

Setting the Clock

Press the MODE button to enter Mode A (Calendar with Year). To enter the Year mode, press and hold the SET button for 2 seconds. The last two digits of the year blink. Press ADD or SUB button to enter correct year, then press the SET button to set month and day.

Setting the Current Time

When in Mode A (Calendar with Year), press the MODE button to enter Mode B (Time). The SET button functions the same as in the other modes. SET sequence is as follows: Time Zone; Seconds; 12/24-Hour Display; Hour; Minutes. Press ADD or SUB button to change. After the time is set, press DST button once to set Daylight Saving Time.

Setting the Alarm

When in Mode B (Time), press the MODE button to enter Mode C (Alarm). Press and hold the SET button to enter Alarm Hour and Minutes settings. Press ADD or SUB to change. To enter Alarm On/Off setting, press SET button once more. When in the Alarm On/Off setting, press ADD or SUB to set the alarm on or off. When set to ON, appears; when off, disappears.

12

Page 11 Page 13
Image 12
Page 11 Page 13
Contents Hadrons Desktop Atomic Clock Weather Station Page Page Table of Contents What isHeadAtomicH1Radioor H2Control? What is Atomic Radio Control? Parts Diagram Back view of clockSetting the Atomic Time and Date HeadBatteriesH1 or H2How to position the clock for the best signal reception Setting theHeadAtomicH1 orTimeH2and Date Setting the Clock Setting the Zone Setting the Current DateSetting the Current Time Setting the AlarmWeather Station BacklightWeatherHdH1Stationor H2 Reading the Barometric Pressure Weather Station Reading the Temperature Reading the HumidityWeather Station Page Warranty What Is Covered
Top Page Image Contents