Schumacher XP2260 owner manual

Page 2

IMPORTANT: READ AND SAVE THIS SAFETY AND INSTRUCTION MANUAL.

SAVE THESE INSTRUCTIONS – Charge the Instant Power™ internal battery immediately after purchase, after every use and every 30 days. This manual will show you how to use your Instant Power™ safely and effectively. Please read, understand and follow these instructions and precautions carefully, as this manual contains important safety and operating instructions. The safety messages used throughout this manual contain a signal word, a message and an icon.

The signal word indicates the level of the hazard in a situation.

Indicates an imminently hazardous situation which, if not avoided, will result in death or serious injury to the operator or bystanders.

Indicates a potentially hazardous situation which, if not avoided, could result in death or serious injury to the operator or bystanders.

Indicates a potentially hazardous situation which, if not avoided, could result in moderate or minor injury to the operator or bystanders.

Indicates a potentially hazardous situation which, if not avoided, could result in damage to the equipment or vehicle or property damage.

Pursuant to California Proposition 65, this product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Wash hands after handling.

1.IMPORTANT SAFETY INSTRUCTIONS – SAVE THESE INSTRUCTIONS This manual contains important safety and operating instructions.

Risk of electric shock or fire.

1.1Read the entire manual before using this product. Failure to do so could result in serious injury or death.

1.2Keep out of reach of children.

1.3Do not put fingers or hands into any of the Instant

Power’s™ outlets.

1.4Do not expose the Instant Power™ to rain or snow.

1.5Use only recommended attachments. Use of an attachment not recommended or sold by Schumacher® Electric Corporation may result in a risk of fire, electric shock or injury to persons or damage to property.

1.6To reduce the risk of damage to the electric plug or cord, pull by the plug rather than the cord when disconnecting the Instant Power™.

1.7Use of an improper extension cord could result in a risk of fire and electric shock. If an extension cord is necessary, a cord with a current rating equal to or more than that of the equipment may overheat. Care should be taken to arrange the cord so that it will not be tripped over or pulled.

1.8To reduce the risk of electric shock, unplug the Instant Power™ wall charger from the outlet before attempting any maintenance or cleaning. Simply turning off the controls will not reduce this risk.

1.9When charging the internal battery, work in a well ventilated area and do not restrict the ventilation in any way.

1.10Do not operate the Instant Power™ with damaged cables or clips; have the cable or clip replaced immediately by a qualified service person. (Call customer service at:

1-800-621-5485.)

1.11Do not operate the Instant Power™ if it has received a sharp blow, been dropped or otherwise damaged in any way; take it to a qualified service person. (Call customer service at: 1-800-621-5485.)

1.12Do not disassemble the Instant Power™; take it to a qualified service person when service or repair is required. Incorrect reassembly may result in a risk of fire or electric shock. (Call customer service at: 1-800-621-5485.)

• 1 •

Page 1 Page 3
Image 2
Page 1 Page 3
Contents Model / Modelo XP2260 Page Risk of Explosive Gases Personal PrecautionsPreparing to use the Instant Power Installation Instructions Risk of Explosion and Contact with Battery AcidDC Connection Precautions FeaturesOperating Instructions Digital Display FunctionsUsing the Built-In Light Powering a 12V DC DeviceUsing the USB Port Risk of ExplosionUsing the Deflator Using the Air Compressor Risk of explosionUsing the Inflator Risk of explosion Before Using the Inverter Important Safety InstructionsUsing the Inverter Powering a 120V AC DeviceMoving and Storage Instructions Maintenance InstructionsRisk of electric shock Charge Immediately After Purchase Keep Fully ChargedTroubleshooting Problem Possible Cause REASON/SOLUTION Replacement PARTS/accessories SpecificationsAC Power Specifications Limited Warranty Warranty not valid in MexicoMount Prospect, IL Mail ToBusiness Center Drive EL Riesgo DE Descarga Eléctrica O Incendio Preparación Para EL USO DEL instant power Riesgo DE Gases ExplosivosPrecauciones DE Conexión EN CC Ubicación DEL Instant powerRiesgo DE Contacto CON EL Ácido DE LA Batería Instrucciones para la instalaciÓnCaracterísticas Riesgo de Explosión Instrucciones DE OperaciónFunciones del indicador digital Uso de la Luz Adjunta Para hacer funcionar un aparato de 12V de CDEl uso de Puerto USB Uso del Compresor de Aire Riesgo de explosiónUso del inflador Riesgo de explosión Uso del desinfladorUso del Inversor Instrucciones para el manejo y almacenamiento Riesgo de descarga eléctricaInstrucciones DE Mantenimiento Localización Y Solución DE Problemas Posible Causa Solutión EncendidoREPUESTOS/accesorios EspecificacionesEspecificaciones de energía en CA ¡NO LO Devuelva este producto a LA Tienda
Related manuals
Manual 30 pages 51.34 Kb

XP2260 specifications

The Schumacher XP2260 is a versatile and powerful battery charger and maintainer designed for both professional and home use. Renowned for its durability and advanced features, the XP2260 provides reliable battery care for various types of vehicles, including cars, trucks, and motorcycles. One of its standout features is its ability to charge both 6V and 12V batteries, making it suitable for a wide range of applications.

Equipped with an automatic smart charge technology, the XP2260 continuously monitors the battery's status and adjusts the charging process to ensure optimal performance. This includes an automatic shut-off feature that prevents overcharging, thereby extending the life of the battery. Users will appreciate the digital display that provides real-time feedback on the battery's voltage and current, enabling them to monitor the charging process conveniently.

Another noteworthy aspect of the Schumacher XP2260 is its built-in desulfation mode, which helps to rejuvenate worn-out batteries. This technology works by removing sulfation buildup, thereby restoring the battery's capacity and reliability. The unit also includes a multi-stage charging feature, ensuring a thorough and efficient charging cycle that enhances the performance and longevity of the battery.

Safety is a priority with the XP2260, which features reverse polarity protection. This prevents damage to the charger and vehicle in the event the clamps are accidentally connected in reverse. Additionally, it is designed with durable casing and is built to withstand tough working conditions, making it a reliable tool for any garage or workshop.

Ease of use is another hallmark of the Schumacher XP2260. The charger comes with easy-to-follow instructions, and its compact design allows for easy storage and portability. Whether you’re a seasoned mechanic or a casual user, this battery charger provides excellent performance and peace of mind.

In summary, the Schumacher XP2260 is a robust battery charger that combines advanced features with user-friendly operation. Its ability to handle both 6V and 12V batteries, smart charging technology, and safety features make it an essential tool for anyone looking to maintain their vehicle’s battery efficiently. With the Schumacher XP2260, users can ensure their batteries remain in peak condition, ready to deliver reliable performance.
Top Page Image Contents