Schumacher XP2260 owner manual Operating Instructions, Digital Display Functions

Page 5

9.Charging the internal battery of the Instant Power™

Important: charge immediately after purchase, after each use and every 30 days to keep the instant power™ INTERNAL BATTERY FULLY CHARGED.

9.1Check the internal battery’s charge level by pressing the Display Button. The Digital Display will show the battery’s percent of charge. Charge the internal battery if the display shows it is under 100%.

Note: The internal battery’s percent of charge is most accurate when the Instant Power™ has been disconnected from all devices and charging sources for a few hours.

9.2Charging the Internal Battery using the Included Wall Charger

1.To charge, plug the included wall charger into the charger plug on the back of the Instant Power™.

2.Plug the wall charger into a 120V electrical wall outlet.

3.While the Instant Power™ is charging, the battery’s percentage of charge will be displayed. When the internal battery is fully charged, the display will show 100. Complete charging may take up to 72 hours. The Instant Power™ is then ready to use.

4.The charger will automatically go into maintain mode and maintain the battery at full charge without damaging it.

5.Charge the Instant Power™ as soon as possible after use.

Do not use the Instant Power™ while charging the internal battery.

You may also charge the internal battery while driving, using a male-to-male charger cable (p/n 94500109 – not included). Insert one end of the accessory cable into the 12V DC power outlet and the other end into the vehicle’s accessory outlet (lighter socket). Completely disconnect the charger cable when the engine is not running.

Using this method to charge the battery overrides the maintain mode and the battery can be overcharged. Monitor the progress of the

battery and when it reaches a full (100%) charge, disconnect the charger. Do not leave the battery unattended or it could explode causing property damage or personal injury.

10.OPERATING INSTRUCTIONS

10.1Digital Display Functions

To check the Instant Power™ internal battery’s status, push the Display Button. The display will show the percent of charge of the internal battery.

When connected to the vehicle, the display shows the vehicle’s battery voltage. When connected and in the ON position, the display shows the equalized voltage between the vehicle’s battery and internal battery.

When the inverter is turned on and being used, the display will show the total wattage used by the device being powered by the inverter.

10.2Jump Starting a Vehicle Engine

A spark near the battery may cause a battery explosion. To reduce the risk of a spark near the battery:

Do not use the Instant Power™ while charging the internal battery.

1.Turn the vehicle’s ignition OFF before making cable connections.

2.Position the DC cables to reduce the risk of damage by the hood, door and moving or hot engine parts. NOTE: If it is necessary to close the hood during the jump starting process, ensure that the hood does not touch the metal part of the battery clips or cut the insulation of the cables.

3.Stay clear of fan blades, belts, pulleys and other parts that can cause injury.

4.Check the polarity of the battery posts. The POSITIVE (POS, P, +) battery post usually has a larger diameter than the NEGATIVE (NEG, N, -) post.

• 4 •

Page 4 Page 6
Image 5
Page 4 Page 6
Contents Model / Modelo XP2260 Page Risk of Explosive Gases Personal PrecautionsPreparing to use the Instant Power DC Connection Precautions Risk of Explosion and Contact with Battery AcidInstallation Instructions FeaturesDigital Display Functions Operating InstructionsUsing the USB Port Powering a 12V DC DeviceUsing the Built-In Light Risk of ExplosionUsing the Inflator Risk of explosion Using the Air Compressor Risk of explosionUsing the Deflator Before Using the Inverter Important Safety InstructionsPowering a 120V AC Device Using the InverterRisk of electric shock Maintenance InstructionsMoving and Storage Instructions Charge Immediately After Purchase Keep Fully ChargedTroubleshooting Problem Possible Cause REASON/SOLUTION Replacement PARTS/accessories SpecificationsAC Power Specifications Warranty not valid in Mexico Limited WarrantyMount Prospect, IL Mail ToBusiness Center Drive EL Riesgo DE Descarga Eléctrica O Incendio Riesgo DE Gases Explosivos Preparación Para EL USO DEL instant powerRiesgo DE Contacto CON EL Ácido DE LA Batería Ubicación DEL Instant powerPrecauciones DE Conexión EN CC Instrucciones para la instalaciÓnCaracterísticas Riesgo de Explosión Instrucciones DE OperaciónFunciones del indicador digital El uso de Puerto USB Para hacer funcionar un aparato de 12V de CDUso de la Luz Adjunta Uso del Compresor de Aire Riesgo de explosiónUso del desinflador Uso del inflador Riesgo de explosiónUso del Inversor Instrucciones para el manejo y almacenamiento Riesgo de descarga eléctricaInstrucciones DE Mantenimiento Encendido Localización Y Solución DE Problemas Posible Causa SolutiónREPUESTOS/accesorios EspecificacionesEspecificaciones de energía en CA ¡NO LO Devuelva este producto a LA Tienda
Related manuals
Manual 30 pages 51.34 Kb

XP2260 specifications

The Schumacher XP2260 is a versatile and powerful battery charger and maintainer designed for both professional and home use. Renowned for its durability and advanced features, the XP2260 provides reliable battery care for various types of vehicles, including cars, trucks, and motorcycles. One of its standout features is its ability to charge both 6V and 12V batteries, making it suitable for a wide range of applications.

Equipped with an automatic smart charge technology, the XP2260 continuously monitors the battery's status and adjusts the charging process to ensure optimal performance. This includes an automatic shut-off feature that prevents overcharging, thereby extending the life of the battery. Users will appreciate the digital display that provides real-time feedback on the battery's voltage and current, enabling them to monitor the charging process conveniently.

Another noteworthy aspect of the Schumacher XP2260 is its built-in desulfation mode, which helps to rejuvenate worn-out batteries. This technology works by removing sulfation buildup, thereby restoring the battery's capacity and reliability. The unit also includes a multi-stage charging feature, ensuring a thorough and efficient charging cycle that enhances the performance and longevity of the battery.

Safety is a priority with the XP2260, which features reverse polarity protection. This prevents damage to the charger and vehicle in the event the clamps are accidentally connected in reverse. Additionally, it is designed with durable casing and is built to withstand tough working conditions, making it a reliable tool for any garage or workshop.

Ease of use is another hallmark of the Schumacher XP2260. The charger comes with easy-to-follow instructions, and its compact design allows for easy storage and portability. Whether you’re a seasoned mechanic or a casual user, this battery charger provides excellent performance and peace of mind.

In summary, the Schumacher XP2260 is a robust battery charger that combines advanced features with user-friendly operation. Its ability to handle both 6V and 12V batteries, smart charging technology, and safety features make it an essential tool for anyone looking to maintain their vehicle’s battery efficiently. With the Schumacher XP2260, users can ensure their batteries remain in peak condition, ready to deliver reliable performance.
Top Page Image Contents