Schumacher XP2260 owner manual Using the Air Compressor Risk of explosion, Using the Deflator

Page 7

4.The Instant Power™ light will turn on and illuminate your work area.

5.Press the Light Switch to the OFF position.

6.Charge the Instant Power™ as soon as possible after using the built-in light.

10.6Using the Air Compressor

Risk of explosion.

Read the instructions of the product being inflated before using the compressor. Avoid overinflation, do not exceed the manufacturer’s recommended pressures. Do not leave the air compressor unattended during use.

1.Ensure the battery clips are securely on the storage holders.

2.Remove the air compressor hose from the storage compartment in the back of the Instant Power™. Install adapters as necessary.

3.Attach the air compressor hose to the product or accessory to be inflated.

4.Place the Compressor/Inflator Switch in the COMPRESSOR position and inflate the product.

5.When the product is inflated to the proper air pressure (using the air compressor gauge) place the Compressor/Inflator Switch in the OFF position and remove the hose.

6.Do not run for more than 10 minutes maximum at a time. Allow the Instant Power™ to cool down for 10 minutes before using again.

NOTE: To prevent overheating, the compressor has built-in thermal protection that will turn the compressor off before it overheats. If the compressor shuts off, wait a few minutes and it will automatically restart when the compressor cools.

NOTE: The air compressor is rated for 150 PSI.

10.7Using the Inflator

Risk of explosion.

Read instructions of the product being inflated before using the inflator. Avoid overinflation, do not exceed the manufacturer’s recommended pressures. Do not leave the inflator unattended during use.

1.Ensure the battery clips are securely on the storage holders.

2.Attach the corrugated hose with end adapter to the high-flow inflator outlet located near the Compressor/Inflator switch on the back of the Instant Power™.

3.The main accessory adapter attached to the corrugated hose accommodates up to 4 sizes. If another size is needed, an additional adapter can be attached to the end of the main accessory adapter.

4.Insert the adapter into the product to be inflated.

5.Push the Compressor/Inflator switch to the INFLATOR position and inflate the product.

6.When the product is inflated to the desired level, push the Compressor/Inflator switch to the OFF position and remove the adapter.

10.8Using the Deflator

1.Ensure the battery clips are securely on the storage holders.

2.Attach the corrugated hose with the end adapter to the high-flow deflator outlet, which is located on the side of the Instant Power™.

3.The main accessory adapter attached to the corrugated hose accommodates up to 4 sizes. If another size is needed, an additional adapter can be attached to the end of the main accessory adapter.

4.Insert the adapter into the item to be deflated.

5.Push the Compressor/Inflator switch to the INFLATOR position and deflate the item.

6.When the product is deflated to the desired level, push the Compressor/Inflator switch to the OFF position and remove the adapter.

10.9Before Using the Inverter Important Safety Instructions:

1.Keep the Instant Power™ well ventilated in order to properly disperse heat generated while it is in use. Make sure there are several inches of clearance around the top and sides, and do not block the vents on the back of the Instant Power™.

• 6 •

Page 6 Page 8
Image 7
Page 6 Page 8
Contents Model / Modelo XP2260 Page Preparing to use the Instant Power Personal PrecautionsRisk of Explosive Gases Features Risk of Explosion and Contact with Battery AcidDC Connection Precautions Installation InstructionsDigital Display Functions Operating InstructionsRisk of Explosion Powering a 12V DC DeviceUsing the USB Port Using the Built-In LightBefore Using the Inverter Important Safety Instructions Using the Air Compressor Risk of explosionUsing the Inflator Risk of explosion Using the DeflatorPowering a 120V AC Device Using the InverterCharge Immediately After Purchase Keep Fully Charged Maintenance InstructionsRisk of electric shock Moving and Storage InstructionsTroubleshooting Problem Possible Cause REASON/SOLUTION AC Power Specifications SpecificationsReplacement PARTS/accessories Warranty not valid in Mexico Limited WarrantyBusiness Center Drive Mail ToMount Prospect, IL EL Riesgo DE Descarga Eléctrica O Incendio Riesgo DE Gases Explosivos Preparación Para EL USO DEL instant powerInstrucciones para la instalaciÓn Ubicación DEL Instant powerRiesgo DE Contacto CON EL Ácido DE LA Batería Precauciones DE Conexión EN CCCaracterísticas Funciones del indicador digital Instrucciones DE OperaciónRiesgo de Explosión Uso del Compresor de Aire Riesgo de explosión Para hacer funcionar un aparato de 12V de CDEl uso de Puerto USB Uso de la Luz AdjuntaUso del desinflador Uso del inflador Riesgo de explosiónUso del Inversor Instrucciones DE Mantenimiento Riesgo de descarga eléctricaInstrucciones para el manejo y almacenamiento Encendido Localización Y Solución DE Problemas Posible Causa SolutiónEspecificaciones de energía en CA EspecificacionesREPUESTOS/accesorios ¡NO LO Devuelva este producto a LA Tienda
Related manuals
Manual 30 pages 51.34 Kb

XP2260 specifications

The Schumacher XP2260 is a versatile and powerful battery charger and maintainer designed for both professional and home use. Renowned for its durability and advanced features, the XP2260 provides reliable battery care for various types of vehicles, including cars, trucks, and motorcycles. One of its standout features is its ability to charge both 6V and 12V batteries, making it suitable for a wide range of applications.

Equipped with an automatic smart charge technology, the XP2260 continuously monitors the battery's status and adjusts the charging process to ensure optimal performance. This includes an automatic shut-off feature that prevents overcharging, thereby extending the life of the battery. Users will appreciate the digital display that provides real-time feedback on the battery's voltage and current, enabling them to monitor the charging process conveniently.

Another noteworthy aspect of the Schumacher XP2260 is its built-in desulfation mode, which helps to rejuvenate worn-out batteries. This technology works by removing sulfation buildup, thereby restoring the battery's capacity and reliability. The unit also includes a multi-stage charging feature, ensuring a thorough and efficient charging cycle that enhances the performance and longevity of the battery.

Safety is a priority with the XP2260, which features reverse polarity protection. This prevents damage to the charger and vehicle in the event the clamps are accidentally connected in reverse. Additionally, it is designed with durable casing and is built to withstand tough working conditions, making it a reliable tool for any garage or workshop.

Ease of use is another hallmark of the Schumacher XP2260. The charger comes with easy-to-follow instructions, and its compact design allows for easy storage and portability. Whether you’re a seasoned mechanic or a casual user, this battery charger provides excellent performance and peace of mind.

In summary, the Schumacher XP2260 is a robust battery charger that combines advanced features with user-friendly operation. Its ability to handle both 6V and 12V batteries, smart charging technology, and safety features make it an essential tool for anyone looking to maintain their vehicle’s battery efficiently. With the Schumacher XP2260, users can ensure their batteries remain in peak condition, ready to deliver reliable performance.
Top Page Image Contents