Schumacher PI-140 owner manual Power Source

Page 4

when you first plug the inverter in, it is a sign that there is a short circuit within the power supply. Remove the 12-volt plug from the 12-volt accessory outlet. Firmly reinsert the plug. If this does not remedy the problem, try using a different 12-volt accessory power outlet.

Note: A ‘’buzzing’’ sound emitted from inexpensive sound systems is the result of ineffective filters in the sound system. This can be resolved by purchasing a sound system with a higher quality power supply or higher quality filter.

POWER SOURCE

Your average automobile or marine battery at full charge will provide an ample power supply to the inverter for ap- proximately 3 hours when the engine is off. The actual length of time the inverter will function depends on the age and condition of the battery and the power demand being placed by the device being operated with the inverter.

Turn OFF the device plugged into the inverter before starting the engine. To maintain battery power, run the engine every 2 to 3 hours for approximately 10 minutes to recharge the battery. While the PI-140 draws very low amperage when not in use, it should be unplugged to avoid battery drain.

Image 4
Contents Power Inverter PI-140 Send Warranty Product Repairs toImportant safety Instructions Before Using PI-140 Power Inverter Operating InstructionsPower Source LED Indicator and Overload Protection ResetUsage Examples Device Type Estimate WattageTroubleshooting Problem Low or No Output VoltageInverter is too hot thermal shut down Fuse blowsReplacement Parts SpecificationsFuse 15 Amp Limited Warranty
Related manuals
Manual 27 pages 52 Kb