TC electronic SDN BHD DVR2 manual Levels, Input Level, Wet Level, Dry Level

Page 10

LEVELS

Input Level

Range: Off to 0dB

Sets the Input level for the plug-in. It may be necessary to lower the input level if sig- nals close to full scale are fed to the plug-in. Reduce the input level in case you expe- rience overloads (O/L).

Wet Level

Range: Off – 0dB

Adjusts the reverb (wet) level of the output channels.

Dry Level

Range: Off to 0dB

Adjusts the dry signal level of the output channels. For a typical send/return configu- ration, leave dry level off.

E N G L I S H

10/ DVR2

Image 10
Contents Manual TC Support Interactive Contact DetailsTable of Contents Recreation of a Classic DVR2 Digital Vintage ReverbBetter than the Classic? Sample Rate PowerCore PCI / Element Enjoy TC Electronic TeamGlobal PLUG-IN Controls Keyboard CommandsUser Interface Disabled Scroll Wheel SupportOverload Indication O/L Focus FieldsTo change the assignment Main PLUG-IN ParametersReverb Vintage Wet Level LevelsInput Level Dry LevelPreset File Menu Preset ManagementNEXT/PREVIOUS Presets Loading a PresetMac OS Default Preset LocationsSaving a Preset WindowsConverting DVR2 Presets from System 6000 and Reverb Compare Settings with A/B MEM Locking Parameter Values Using the Parameter Lock 16 / DVR2