Tekram Technology TR-824 manual Existing Windows 98 Installation, Click Next, then Finish

5. INSTALLING SOFTWARE DRIVERS)

Next.

10.Choose Specify Location then type “A:\tr824.inf” in the text box.

11.Insert the TR-824 driver diskette into the A:\ drive.

12.Click the Next button. A message informing you “Windows 98 has found Tekram TR-824 SATARaid Controller” should appear.

13.Click Next, then Finish.

14.When asked if you want to restart your computer, click Yes. Immediately remove the diskette from drive A:\.

5.5.2 Existing Windows 98 Installation

The following section details the installation of TR-824 drivers on a system that has Windows 98 already installed and running.

1.After installing the TR-824 controller card and configuring the hard drives, power up the system and boot Windows.

2.The Add New Hardware Wizard will appear, informing you that it has found a PCI Mass Storage Controller.

3.Click Next. From the generated list box, choose Search for best driver for your device (Recommended).

4.Insert the TR-824 driver diskette in drive A:\.

5.Click Next. From the generated choices, choose Specify a location.

6.Type “A:\tr824.inf” in the text box that appears.

7.Click Next. A message informing you that “Windows 98 has found Tekram TR-824 SATARaid Controller” should appear.

8.Click Next, then click Finish.

9.Click Yes when asked if you want to restart your computer. Be sure to eject the diskette from drive A:\.

5.5.3 Confirming Driver Installation in Windows 98

To confirm that the driver has been properly loaded in Windows 98, perform the following steps:

1.Choose Settings from the Start menu.

2.Choose Control Panel, then double-click the System icon.

3.Choose the Device Manager tab, then click the “+” in front of SCSI controllers. “Tekram TR-824 SATARaid Controller” should appear.

TR-824 User’s Manual

17