Tekram Technology TR-824 manual Installing Hard Drives

2. HARDWARE SETUP

2.3 Installing Hard Drives

The TR-824 Controller card supports up to four Serial ATA hard drives. Install all of the hard drives into the hard drive bays of your system, including their power cables.

Attach one Serial ATA data cable to each hard drive. Then attach the other ends of the cables to one of the Serial ATA ports on the TR-824 card. All of the connectors are keyed so they can only be attached one way.

Note: The TR-824 Controller card is a PCI Plug-n-Play (PnP) device. No changes are necessary in the Motherboard CMOS Setup for resources or drive types in most applications.

TR-824 User’s Manual

9