Tascam 414MKII owner manual Table Of Contents

Page 2

Table Of Contents

Safety Instructions

3

The PORTASTUDIO 414 MKII is...

4

The Recording System

5

The Three Steps to Multitrack

5

Understanding the Mixer

6-7

Signal Flow in the 414 MKII Mixer

6

Tape Cue Monitor System

7

Multitrack Cassette Recorder

8

Track Format and Tape

 

Recommendations

8-9

Optional Accessories

10

PORTASTUDIO 414 MKII Brief Guide

11-14

Step-By-Step Operation Guide

15-23

Let's Try the 414 MKII Mixer

15

How to Record on Track 1

16

Track 1 Playback through TAPE CUE

17

How to Make an Overdub on Track 2

18

How to Record Tracks 3 and 4

20

How to Record Many Sources onto a

 

Single Track

20

How to Record a Mix onto Two Tracks

 

Simultaneously

21

Recording on More than Two Tracks

 

Simultaneously : Direct Recording

22

How to Mix Down

22

PUNCH-IN or INSERT Recording

24-25

Preliminary

24

Punch-in Procedure

25

Bouncing Tracks (Ping-Pong)

26

Ping-pong Procedure

26

Using Effects with the

 

PORTASTUDIO 414 MKII

27-28

Setting Effect Send Levels

27

Setting the Output Level of Effect

 

Devices

27

Setting the Mix/Balance Control

 

on Effect Devices

28

How to Connect Your Effects Devices

28

Syncing MIDI-Tape Using the

 

TASCAM MTS-30

29

Troubleshooting

30

Features and Controls

31-35

414 MKII MIXER

 

Input Section

32

Stereo Input Section

33

Monitor Section

33

Master Section

33

Output Section

33

414 MKII RECORDER

 

Cassette Loading and dbx System

34

Transport Controls

34

Track Controls

35

Displays

35

Care and Maintenance

35-36

How the dbx Works

36

Specifications

37-38

Block Diagram

39-40

Level Diagram

41

"© Copyright 1999, TEAC Corporation"

All rights reserved under international and Pan American copyright conventions.

This book may not be reproduced in whole or in part, by mimeograph or any other means, without permission.

"The following marking is located on the bottom of the unit."

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

The lightning flash with arrowhead symbol, within equilateral triangle, is intended to alert the user to the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to person.

The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance.

This appliance has a serial number located on the rear panel. Please record the model number and serial number and retain them for your records.

Model number Serial number

WARNING: TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.

2

Image 2
Contents 414@# Table Of Contents Safety Instructions Portastudio 414 Mkii is Do not cut off the mains plug from thisRecording System Three Steps to MultitrackSignal Flow in the 414 Mkii Mixer Understanding the MixerTape Cue Monitor System Tape Speed and Track Format Multitrack Cassette RecorderTrack Format and Tape Recommendations Tape Length Tape TypeAccidental Erase/Record Protection Optional Accessories RC-30P Remote FootswitchMonitor Section Input Selection and AdjustmentPortastudio 414 Mkii Brief Guide Master SectionCounter reset button Press to change the counter to Recorder Controls Connections on the Rear PanelStep-By-Step-Operation Guide Lets Try the 414 Mkii MixerHow to Record on Track Track 1 Playback through Tape CUE Stopping playback How to Make an Overdub on TrackRouting tape signals to Tape CUE Routing inputMonitoring input/tape Record level adjustment TrimTrack selection How to Record Tracks 3 How to Record Many Sources onto a Single TrackHow to Record a Mix onto Two Tracks Simultaneously Recording the stereo channels 5-6Monitor source How to Mix DownConnections Record level Playback levelReview Selecting in and out points PUNCH-IN or Insert RecordingPreliminary Punching-in/out with Record Punch-in ProcedureUsing the remote footswitch RC-30P Ping-pong Procedure Bouncing Tracks Ping-PongSetting the Output Level of Effect Devices Using Effects with the Portastudio 414 MkiiSetting Effect Send Levels Setting the Mix/Balance Control on Effect Devices How to Connect Your Effects DevicesSyncing MIDI-Tape Using the Tascam MTS-30 TroubleshootingInput Section Features and ControlsDC in 12 V connector on the rear panel Guitar in & Trim control on the rearOutput Section Stereo Input SectionMonitor Section Master SectionTape path components Cassette Loading and dbx SystemTransport Controls Play keyTrack Controls Care and MaintenanceCleaning the Heads and Tape Guides DisplaysHow the dbx Works Cleaning the Pinch RollerCleaning the Capstan Shaft Degaussing the Tape PathSpecifications Mechanical CharacteristicsBlock Diagram CH 1 CHLevel Diagram TRK414@#