Sceptre Technologies X24 manual If You Have Component Connection on Your HD Box…

If You Have Component Connection on Your HD Box…

1.Make sure the power of X24 LCD MONITOR is turned off.

2.If you have component connection on your HD set-top box, purchase a VGA to female component video conversion cable and connect the component end to regular component cables and regular component cables to the HD set-top box. Connect the VGA end to the X24 LCD monitor. Make sure you match the colors on the component connection.

3.Turn on the X24 LCD MONITOR and your video device.

4.Use the side button ► to select VGA on the X24 LCD MONITOR. Please Note :

•Please reference your set-top box manual to make sure the proper settings are configured for your video device.

•Since this monitor does not feature audio, you need to have your own speaker setup for audio.

Page28 SCEPTRE X24