•The X24 LCD MONITOR is equipped with a
This plug will fit only into a grounded power outlet as a safety feature. If your outlet does not accommodate the
•Do not overload power strips and extension cords. Overloading can result in fire or electric shock.
•The wall socket should be installed near the equipment and should be easily accessible.
•Only the marked power source can be used for the product. Any power source other than the specified one may cause fire or electric shock.
•Do not touch the power cord during thunderstorms. To avoid electric shock, avoid handling the power cord during electrical storms.
•Unplug the unit during a lightning storm or when it will not be used for a long period of time. This will protect the X24 LCD MONITOR from damage due to power surges.
•Do not attempt to repair or service the product yourself. Opening or removing the back cover may expose you to high voltages, the risk of electric shock, and other hazards. If repair is required, please contact your dealer and refer all servicing to qualified service personnel.
•Keep the product away from moisture. Do not expose this appliance to rain or moisture. If water penetrates into the product, unplug the power cord and contact your dealer. Continuous use in this case may result in fire or electric shock.
•Do not use the product if any abnormality occurs. If any smoke or odor becomes apparent, unplug the power cord and contact your dealer
immediately. Do not try to repair the product yourself.
•Avoid using dropped or damaged appliances. If the product is dropped and the housing is damaged, the internal components may function abnormally. Unplug the power cord immediately and contact your dealer for repair. Continued use of the product may cause fire or electric shock.
•Do not install the product in an area with heavy dust or high humidity. Operating the product in environments with heavy dust or high humidity may cause fire or electric shock.
•Hold the power connector when removing the power cable. Pulling the power cable itself may damage the wires inside the cable and cause fire or electric shocks. When the product will not be used for an extended period of time, unplug the power connector.
•To avoid risk of electric shock, do not touch the connector with wet hands.
•Insert batteries in accordance with instructions while using the remote control. Incorrect polarities may cause damage and leakage of the batteries, operator injury and contamination the remote control.
•If any of the following occurs please contact the dealer:
o The power connector fails or frays.
o Liquid sprays or any object drops into the X24 LCD MONITOR.
o The Display is exposed to rain or other moisture.
o The Display is dropped or damaged in any way.
o The performance of the
Display changes substantially.
•Operating environment: Temperature:
5°C ~ 35°C, Humidity: 10% to 90%
Page6 | SCEPTRE X24 |