Sceptre Technologies X24 manual Supported Video Resolution, Troubleshooting

Supported Video Resolution

			Vertical		Horizontal
Item	Standards		Scanning		Scanning
			Frequency		Frequency
			(Hz)		(kHz)
1	720x480i	29.97		15.73
2	720x480P	59.94		31.46
3	1280x720P	60		45
4	1920x1080i	30		33.75
5	1920x1080P	60		67.5

Troubleshooting

Problem		Possible solutions
	To stabilize and clarify your display, use the AUTO ADJUST function or
DISPLAY IS UNCLEAR	change the resolution to the display’s optimal setting 1920 X 1200 at
AND UNSTABLE	60Hz, then AUTO ADJUST.
	Make sure you switched to the correct source. Check both sources to
THERE IS NO LCD	see video is on the other source. Check your video cable. It might be
DISPLAY or SCREEN	corrupt. Swap out the video cable for another one to see if the monitor
SAYS NO VIDEO	will work. Check your power plug. See if it is fully plugged in on both
	the monitor and the wall.
	If you have a CRT monitor, please connect the CRT monitor to the
MONITOR SAYS	computer and change the refresh rate down to 60Hz via your video
“SIGNAL OUT OF	card’s display settings menu. After the setting of 60Hz has been
RANGE”	change you can then use the LCD on the computer.
	1.	To change the setting go to display settings by right clicking
		on your desktop with nothing selected. Choose the
		PROPERTIES option.
	2.	Click on the SETTINGS tab, verify the resolution is NOT
		higher than 1920x1200, click on the ADVANCED button.
	3.	Click on the MONITOR tab and change the refresh rate to
		60Hz.
	4.	Click on OK 2-3 times to finalize your change.
	If you do NOT have a CRT monitor or it’s already broken, please make
	sure both the X24 monitor and your computer is turned off.

Page46 SCEPTRE X24