DTS® SURROUND ADAPTOR RDA-986
Power Switch 1 and Power Indicator 2
The power switch is located on the front panel of your
Digital Signal Connections
The
Digital Inputs 5 and 7
The
–an optical input connection and a 75 ohm coaxial input connec- tion. Select the type of connection that best matches the output connector on your video disc player or other source component, using either a standard optical digital cable or a standard 75 ohm coax digital cable.
Digital Input Selector Switch 6
A
Analog Signal Connections
The
25-pin Analog Output 10
The most convenient analog output connection is the rear panel
RCA Analog Outputs 11
The
25-pin Analog Input 9
Coaxial Digital Output 8
The digital output connector is used to pass the unprocessed digi- tal signal from the digital input through to another processor. For example, the same DVD player might be used to play both DTS en- coded and Dolby Digital encoded surround sound material. A DTS encoded signal will be decoded by the
5.1channel analog signal sent to the surround sound processor. A Dolby Digital encoded signal will be sent, unprocessed, from the digital output to the digital input of a Dolby Digital decoder for pro- cessing. This
Connect the digital output connector to the digital input connector on your Dolby Digital decoder or directly to your surround sound processor’s digital input, if it has
DTS Indicator 3 and Signal Indicator 4
There are two LED indicators on the
In many systems, the
Switching between the digital input and the
Note: If you have a DTS signal at the digital inputs and an analog signal at the analog inputs, the DTS signal will take priority. To switch to the analog signal, put the DTS source component in its PAUSE or STOP mode.
4