Troubleshooting

“Tinny” sound.

Check the “Downmix” setting in the SETUP menus and ensure that it is set to “Stereo,” not “LT/RT.”

No sound

Make sure that the audio output is set to “Analog”, under Audio, Audio Out.

Picture distorts, “rolls”, appears black and white.

Check that the TV Type setting is correct for the monitors being used. (See “Changing the Video Output Mode”.) PAL video often “rolls” on NTSC monitors.

With a widescreen 16:9 monitor, I have black bars on the top and bottom of my screen.

Change the TV Display mode to “Wide” in the Setup Menu.

The DVA-3210 does not track discs well.

Make sure the side spring adjustments are correct.

22DVA-3210

SPECIFICATIONS

Dimension (WxDxH) : W 262 mmX D 175 mmX H 82 mm

Weight : 2.5kg

Supply voltage: 12V DC Nominal, 11-16V operating voltage*

Temperature: 0o to 50o Celsius*

Current consumption: Less than 3.0A

Video:

Television System: NTSC/PAL

Aspect ratio: 4:3, 16:9

TV encoder resolution: 10-bit DA converter

Video Signal-to-noise ratio: 65dB

Discs played:

DVD video discs—

5“ and 3” (12 & 8 cm) single-sided, single and double-layer Compact discs (CD-DA,VIDEO-CD,CD-R)—

5“ and 3” (12 & 8 cm) disc Audio output level: 700mV RMS

Audio signal output characteristics:

Frequency response: 20 Hz - 20 kHz (CD audio/44.1kHz sampling rate)

S/N ratio: 90 dB (JIS)

Crosstalk: -75dB

Dynamic range: Above 85dB

Distortion: 0.02% (1 kHz)

Digital audio output: SPDIF optical output (IEC 958)

*Note: Use of the DVA-3210 beyond the safe operating ranges listed can cause temporary or permanent damage to the unit, and such dam- age may not covered by the manufacturer’s warranty.