Rosen Entertainment Systems Using the DVA-3210, Discs Incompatible with the DVA-3210

Page 5

the DVD disc does not correspond to the Region number of this player (Region 1), this player will not be able to play the DVD disc. Some DVD discs are manufactured to operate in “all” zones, and those discs are compatible with the DVA- 3210.

Region Icons:

ALL 1 1 4

6

Discs Incompatible with the DVA-3210

The following disc types are incompatible with the DVA-3210:

DVD-ROM

DVD-R/DVD-RW/DVD-RAM

Photo CD

CD-ROM (Excluding most CD-Recordable discs using MP3 or CD-A formats)

CD-Audio manufactured with certain copy protection methods

Any DVD with a Region number other than “1” and “ALL”

USING THE DVA-3210

In order to operate the DVA-3210, the vehicle ignition key switch must be in the ACC or engine ON position.

ACC or engine

ON position

WARNING!

To prevent the battery from going dead, operate this unit with the engine running, if possible.

Please note that information about using the DVA-3210 will be displayed on the video screen connected to the unit, and initial setup of the DVA-3210 cannot be completed without an operating video monitor providing this on-screen display of menus and settings. Whenever the term “on-screen display” is used, it refers to the video monitor display.

DVA-3210 5

Image 5
Contents Table of Contents About InstallationAbout the Registered Marks Accessories Supplied with the DVA-3210Introduction FCC Approval Care and MaintenanceHandling Discs Liquids and the DVA-3210Discs Played by the DVA-3210 Temperature and MoistureDiscs Compatible with the DVA-3210 DVD RegionsRegion Icons Using the DVA-3210Discs Incompatible with the DVA-3210 Using a Remote Control Optional Remote ControlInserting a DVD/VCD/CD DVD/VCD/CD-AUDIO PlaybackDisc Playback Stopping PlaybackRepeat Mode Pausing PlaybackSelecting a Track or Chapter Viewing AnglesWelcome Parental ControlMP3 Playback on CD-R Discs What is MP3?MP3 Playback Supported MP3 File FormatsFile Extensions Package Contents Installation and Wiring Before StartingInstallation Requirements Always adjust the springs as shownHorizontal, brackets up, or 45 degrees, upward inclination Wiring the DVA-3210 Installing the DVA-3210DVA-3210 Typical Setup and Configuration SetupDVA-3210 connecting to compatible control unit Changing the Aspect Ratio Mode Changing SettingsConcealing the Angle Mark Changing the Video Output ModeActivating the Digital Output Activating Captions and SubtitlesDeactivating the Smart Nav On-Screen Menu Display Selecting an Lpcm Output FrequencyTo change the on-screen display language, select GEN Changing Language SettingsTo change the disc menu language, select Preferences Specifications TroubleshootingDVA-3210 DVA-3210 DVA-3210 10-DISC Changer