Savin 1013 operating instructions Error & Status Messages on the Control Panel

3. Troubleshooting

Error & Status Messages on the Control Panel

Messages/Second messages	Description	Solution
Add Toner	Toner is running out.	It is time to supply toner.
Open Front Cover and
/Follow Instructions to
Replace it
Clear Misfeed(s)	There is misfeed at the front	Remove the misfed paper fol-
/Follow instructions in	cover.	lowing the instructions inside
		the front cover.
Front Cover
Close Front/Right Cover	The front or right cover is open.	Close the front or right cover.
Load Bypass Tray	There is no paper left in the	Load paper into the Bypass
[Paper Size]	Bypass Tray.	Tray.
Load Paper	The paper size setting on the	Load paper that matches the
[Paper Size]	tray differs from that of print-	paper size settings. Printing
	er driver.	will not automatically resume
		if the paper size and orienta-
		tion settings are incorrect.
Load Tray #	There is no paper left in this	Load paper into the tray indi-
[Paper Size]	tray.	cated.
Memory Overflow	A memory overflow has oc-	Add memory to the printer.
Job Incomplete	curred.
Memory Full	A memory full has occurred.	Add memory to the printer.
Job Incomplete
Printing...	The printer is printing.	Wait for a while.
Print Overrun	A print overrun occurred on a	To print the image correctly,
Job Incomplete	file being printed. Only a part	add memory to the printer or
	of the data on the page will be	simplify the actual data size.
	printed, and the print job is	Set "Page Protect" to "On" on
	suspended, or the current	the printer driver. Be sure to
	print job has been canceled.	return "Page Protect" to "Au-
		to" after the print job. With
		"Page Protect" "On", the print-
		er performance might be de-
		creased. While using the
		PostScript printer driver, low-
		er the resolution setting.

19