Savin 1302f, 2513f manual Remarks, Dos and Donts

Page 72

5. Remarks

Do's and Don'ts

RCAUTION:

•Unplug the power cord from the wall outlet before you move the equipment. While moving the equipment, you should take care that the power cord will not be damaged under the equipment.

Important

❒Make sure the remaining memory space is 100%, before you unplug the pow- er cord.

❒While the machine is unplugged, you can neither send nor receive a fax.

Reference

For details, see the Facsimile Reference manual.

•When you use this machine for a long time in a confined space without good ventilation, you may notice an odd smell. To keep the workplace comfortable, we recommend that you keep it well ventilated.

•Do not touch areas on or around the fusing unit. These areas get hot.

•After making copies continuously, you may feel the exposure glass is heated. This is not a malfunction.

•You may feel warm around the ventilation hole. This is caused by exhaust air, and is not a malfunction.

•Do not turn off the operation switch while copying or printing. When turning off the operation switch, copying with memory and printing continue. How- ever, scanning of copy originals is interrupted.

•The machine might fail to produce good copy images if condensation forms inside the machine due to temperature change.

•Do not open the covers of the machine while copying or printing. If you do, misfeeds might occur.

•Do not move the machine while copying or printing.

•If you operate the machine improperly or a failure occurs, your settings might be lost. Be sure to take a note of your machine settings.

•Supplier shall not be liable for any loss or damages resulting from a failure on the machine, loss of machine settings, and use of the machine.

59

Image 72

Contents Page 2513/2513 f 1302/1302 Page Safety Information Safety During OperationPage Positions of Labels and Hallmarks for Rwarning and Rcaution How to Read this Manual SymbolsMachine Types What You Can Do with This Machine Table of Contents Troubleshooting Specifications Page Guide to Components On indicator Operation switchControl panel Bypass trayOptions Paper tray unitCopier only Fax and/or printer installed Cancel keyControl Panel Copy keyClear/Stop key Clear Modes keyMenu key Select Paper Tray keyPanel Display Displays and Key OperationsCopy display Common keysTurning On the Power Turning On the Main PowerOperation switch right side of the control panel Main power switch left side of the machinePress the operation switch to make the On indicator go on Turning Off the Main PowerTurn off the main power switch Starting the MachineChanging Modes Sizes and Weights of Recommended Originals OriginalsMetric version Inch versionOriginal Sizes and Scanning Area/Missing Image Area Exposure glass Document feeder ADFCopy Paper Recommended Paper Sizes and TypesNon-recommended Paper Paper Storage Toner Toner StorageUsed Toner Basics Basic Procedure Make sure that the machine is in Copy modePlace your originals Press the Start keyAuto Off Placing Originals Placing Originals on Exposure GlassLoading Originals Document Feeder ADF Placing Standard Size OriginalsLimit mark Document guide Placing Custom Size Originals Press the Select Paper Tray key to select your desired trayYou can also enter this mode by pressing the R/# key Basic Functions Selecting an Original TypeText PhotoSelecting Copy Paper Sort SortEnter the number of copy sets with the number keys After all originals are scanned, press the R/# keyCopying from the Bypass Tray When copying onto OHP transparencies Push down the paper guide re- lease leverPress the User Tools/Counter key When copying onto standard size paper When copying onto custom size copy paperWhen copying onto envelopes Setting the User Code Press the User Tools/Counter key Other FunctionsUser Codes Auto StartPreset Reduce/Enlarge Press the OK keyPlace your originals, and then press the Start key Zoom Press the Zoom key Enter the ratioEnter the desired reproduction ratios with the 0 or 1 key Enter the desired ratio with the number keysCombine Portrait K originalsLandscape L originals Select with the 0 or 1 key, and then press the OK key Press the Select Paper Tray key to select the copy paperLoad your originals, and then press the Start key Combination Chart Following shows the combinations of functionsCopying Machine Operation Problems GeneralDisplay Cannot Make Clear Copies Cannot Make Desired Copies CombineHLoading Paper Loading paper in the optional paper tray unitPush the paper tray in until it stops Readjust the back fence and side fences HChanging the Toner Cartridge Regarding toner storage, see p.15 Toner StorageShake it 5 or 6 times HClearing Misfeeds HClearing Misfeeds Adjust the back fence Changing the Paper SizeChanging the Paper Size in the Paper Tray Adjust the side and back fences to the new paper size Square the paper and load it in the trayPush the paper tray in until it stops Selecting the Paper Size with the User Tools Troubleshooting User Tools Copier Features Accessing the User Tools Copier FeaturesExiting the User Tools User Tools Menu Copier Features Settings You Can Change with the User Tools Copier FeaturesMenu Description Menu Description Remarks Dos and DontsWhere to Put Your Machine Machine EnvironmentOptimum environmental conditions Environments to avoidPower Connection Access to Machine Right more than 1cm Left more than 1cmCleaning the machine Maintaining Your MachineRemarks Mainframe Copy paper weight Non-reproduction areaFirst copy time Copying speedPower consumption Dimensions W ⋅ D ⋅ H up to exposure glassWeight Noise Emission *1Document Feeder ADF Option for Type Specifications are subject to change without notice Paper Tray Unit OptionAvailable paper size Paper capacity32MB Copier Memory Unit Option Memory capacityAdditional functions Number of originals that can be stored about 99 pagesIndex Toner User Codes, 31 User Tools Ventilation hole Zoom Memo UE USA B045 Means Power ON. c means Stand by UE USA B045-7207