Verbatim K7VT4-8X, K7VT4-4X user manual Chipset Configuration

Chipset Configuration:

AMIBIOS SETUP UTILITY - VERSION 3.31a

Advanced

Chipset Configuration				[ Setup Help ]
				<Enter> to select [4X],
AGP Mode			Auto
				[2X], [1X] as the AGP
AGP Aperture Size			64MB
				mode.
AGP Fast Write			Disabled
PCI Delay Transaction			Disabled
USB Controller			Disabled
USB Device Legacy Support			Disabled
DRAM CAS# Latency			Auto
Over Vcore Voltage			Disabled
F1:Help	:Select Item	+/-:Change Values		F9:Setup Defaults
Esc:Previous Menu		Enter:Select Sub-Menu		F10:Save & Exit

AGP Mode: If K7VT4-4X motherboard is installed for your PC system, you may select [4X], [2X], or [1X] as the AGP mode. But when an 8X-AGP- card is installed on K7VT4-8X motherboard for your PC system, this feature will be set to [Auto] automatically.

AGP Aperture Size: It refers to a section of the PCI memory address range used for graphics memory. It is recommended to leave this field at the default value unless the installed AGP card’s specifications requires other sizes.

AGP Fast Write: This allows you to enable or disable the feature of AGP fast write protocol support.

PCI Delay Transaction: Enable PCI Delay Transaction feature will free the PCI Bus when the CPU is accessing 8-bit ISA cards. Disable this feature when using ISA cards that are not PCI 2.1 compliant.

USB Controller: Use this to enable or disable the use of USB controller.

USB Device Legacy Support: Use this to enable or disable the support to emulate legacy I/O devices such as mouse, keyboard,... etc.

DRAM CAS# Latency: This is used to adjust the means of memory accessing. Configuration options: [Auto], [2T], [2.5T], [3T].

Please note that not all the DDR DIMMs can support CAS latency=3T. Over Vcore Voltage: This feature allows you to increase the CPU Vcore

voltage around 3% or 6%. The default value is [Disabled].

It is not recommended to enable “Over Vcore Voltage” feature. Doing so may cause CPU damage.

2 4