Unitech MR350MKII manual Set beepers volume

N).	Set beeper's volume.
O).	Set a executable object program to be started up
	automatically after power-up.
Q).	Inquire Uploading status (Not available on MR350MKII)
R).	Change terminal's ID.
T).	Set terminal control table.
U).	Upload a program or data file from MR350MKII.
V).	Set device control table.
X).	Remote run means that starting up an pre-downloaded
	executable object program on the terminal.
3).	Set power saving (Not available on MR350MKII)
5).	Set connected terminal address.
9).	Loop back testing.
@).	Dumping terminal and Modem control
?).	MR320's setting (Not available on MR350MKII)
~).	Disable UPS
F1).	Set available terminal address to be communicated
F2).	Set PC's communication parameter
F3).	Set time period of Time-out/ NAK re-try / ACK
F4).	Debug mode (display whole received and sent data)
F5).	Go to DOS shell
F6).	Set communication packet size (For debug only)

[ESC]. Exit 485COM.EXE and back to DOS prompt.

7)Select item F1) to key in the address of all connected terminals or some terminals to be tested; for example, if there are three terminals connected with address A, B, C, respectively, type “ABC”.

8)Select item L) to download program 350TEST.EXE. This procedure will be repeated till all designated terminals have been downloaded.

9)Select item X) and input program name, 350TEST, to start up the program on all designated terminals in step 7.

1-12