Uniden UBC-RH96 manual Using Hook and Loop Material

Page 9

5.Route the Remote Cable through the Slotted Guide

(3) so it lies ﬂat. Route the Power Cord so it does not interfere with any other wires.

Using Hook and Loop Material

The rear of the unit, when all connectors and cables are properly routed, is ﬂat. This permits using hook and loop material (not supplied) that has a heavy-duty peel and stick adhesive on one side. This material is generally available from electronic supply stores and hardware stores.

Do not apply the tape to the rear until all cables are installed and routed correctly.

Do not cover the slotted guide with the tape.

Follow the directions supplied with the hook and loop material. Locate a suitable spot on the dash, console, or other area. If you use the Remote Head in another place such as a radio room, using tape lets you quickly mount or remove the Head as desired.

9

UBC-RH96 Digital Scanner OM.indd9 9

10/9/07 4:15:58 PM

Image 9

Contents UBC-RH96 UBC-RH96 Digital Scanner OM.indd2 10/9/07 41556 PM Table of Contents Speciﬁcations One Year Limited Warranty Introduction Included with your UBC-RH96 Mounting the UBC-RH96 Using the Mounting BracketUBC-RH96 Using Hook and Loop Material UBC-RH96 Connections DC Power Input JackConnecting Cables Remote Head and Scanner PowerControl Cable Data Port Cable Firmware Updates Control Conﬁguration Guides UBCD396T Key Conﬁguration UBCD996T Key Conﬁguration Version OperationPowering down the remote head does not turn off the Scanner Setting the UBC-RH96 BacklightSetting the UBC-RH96 LCD Contrast Conﬁguration Menu ModeMobile Default Key Assigment Setting Mobile OptionsFunc +MENU Default Handy Option Key Assigment Setting Handy OptionsSetting Hold Timer Setting the Function ModeSetting Auto Release Volume Settings For Handy ScannerMiscellaneous Control Limitations Serial Operation PrecautionsInitialize Memory Reset Speciﬁcations ONE Year Limited WarrantyParts Covered 2007