UBC93XLT Paper OM.fm Page 32 Monday, May 14, 2007 9:01 AM
press Func + 
or Func + 
to step through the frequencies.
To release the hold and continue searching, press Hold. Or, if you did not press Hold, simply press Func + 
or Func + 
to continue searching.
Note: Because there are many different frequencies allocated to police departments, it can take several minutes to search all the service frequencies.
Storing Frequencies into Channels During Service Search
You can store frequencies you found during service search or service search hold mode into channels.
1.Press Func and Pgm during service search or service search hold mode. The frequency and the lowest blank channel alternately appear.
2.Press E to store the frequency into the blank channel. If you want to select another channel, press Func + 
or Func + 
before you press E. You can also use the
If you entered a frequency that has already been entered elsewhere, the scanner sounds an error tone and displays the channel that was duplicated. If you entered the frequency by mistake, press 
then enter the correct frequency. To enter the frequency anyway, press E to accept.
Scanning the Stored Channels
To begin scanning channels, press Scan.
The scanner scans through all
Operation
32