UBC93XLT Paper OM.fm Page 40 Monday, May 14, 2007 9:01 AM
The scanner sets itself to program mode after you store a frequency.
Setting the Search Range
You can use this mode to define the search range used during a chain search in each search bank. To set the scanner to program band select mode, press Func and PSrc. SRCH appears. Then select a search bank.
When you select the search bank, the lower limit and upper limit frequency assigned in the search bank alternate on the display.
To select another search bank, press Func + PSrc or Func + 
to increase the search bank number or Func + 
to decrease it. Hold down Func + 
or Func + 
for about 1 second to quickly move through the search bank numbers.
After choosing the search bank, follow these steps to set the lower limit and upper limit frequency.
1.Enter the lower limit frequency by using the
2.Press E to select the lower limit frequency.
3.Enter the upper limit frequency by using the 
keys.
4.Press E to select the upper limit frequency.
Direct Entry Search
You can use direct entry search to search up or down from the currently displayed frequency.
1.If the scanner is scanning or searching, press Hold.
2.Enter the frequency you want to start from by using the number keys. (Press 
to enter a decimal point).
Special Features
40