Uniden UBC73XLT owner manual Using Rechargeable Batteries

UBC73XLT Paper OM.fm Page 17 Monday, May 14, 2007 9:13 AM

Cautions:

•Use only fresh batteries of the required size and recommended type.

•Always remove old or weak batteries. Batteries can leak chemicals that destroy electronic circuits.

•Do not mix old and new batteries, different types of batteries (standard, alkaline, or rechargeable), or rechargeable batteries of different capacities.

5. Replace the cover.

6.When flashes and the scanner beeps every 15 seconds, replace both batteries.

Using Rechargeable Batteries

You can also use two rechargeable batteries to power your scanner. Before you use Ni-MH or Ni-Cd batteries, you must charge them.

The scanner has a built-in circuit that lets you recharge Ni-MH or Ni-Cd batteries while they are in the scanner. To charge the batteries, set

REG. ALK. BATT./NI-MH BATT. inside the battery compartment to NI-MH BATT., install the batteries in the scanner, and connect the included external DC adapter or optional external AC adapter to the scan- ner's DC 6V jack (see “Using DC power” on Page 19 and “Using AC Power” on Page 20).

Setting Up Your Scanner

17