UBC73XLT Paper OM.fm Page 43 Monday, May 14, 2007 9:13 AM
memory and automatically resumes the search if it is not in hold.
Follow these steps to clear a single frequency from skip memory so the scanner stops on it during a search.
1.Press Hold to stop the search.
2.Press Func + 
or Func + 
to select the frequency. L/O appears.
3.Press Func + L/O. L/O disappears.
To clear all the skip frequencies at once while searching or search hold, press Func then press and hold L/O until the scanner beeps.
Notes:
•If you selected all frequencies to be skipped within the search range, the scanner beeps 3 times and does not search.
•If you select more than 50 frequencies to skip, each new frequency replaces a frequency previously stored, beginning with the first stored frequency.
•Press Func + 
or Func + 
to select a skipped frequency while Hold appears. L/O appears when you select a skipped frequency.
Delay
Sometimes a user might pause before replying to a transmission. To avoid missing a reply on a specific channel, you can program a
2 seconds after the transmission stops before resuming scanning or searching. The scanner automatically sets a delay when you store
Special Features
43