UBC73XLT Paper OM.fm Page 42 Monday, May 14, 2007 9:13 AM
Storing Frequencies Found During Direct Entry Search into Channel Memory
Follow these steps to store frequencies received during direct entry search mode or direct entry search hold mode.
1.Press Func + Pgm in direct entry search mode or direct entry search hold mode. The frequency and lowest blank channel alternate on the display.
2.Press E to store the frequency into the blank channel. To select another channel, repeatedly press Func + 
or Func + 
to select the blank channel you want, then press E. You can also use the
If you enter a frequency that has already been entered elsewhere, the scanner sounds an error tone and displays the channel that was duplicated. If you entered the frequency by mistake, press 
.
To enter the frequency anyway, press E to accept.
The scanner moves to program mode after you stored the frequency.
Search Skip Memory
You can skip up to 50 specified frequencies during a search. This lets you avoid unwanted frequencies or those already stored in a channel.
Note: Search skip frequencies are shared by service search, direct entry search, chain search, and Close Call modes. If skip frequencies are sent in certain mode, the frequencies are also skipped in other search modes and Close Call mode.
To skip a frequency, press Func and L/O when the scanner stops on the frequency during a search or a search hold. The scanner stores the frequency in
Special Features
42