UP308BH (DSS2465) ENG OM 1/14/05 11:49 AM Page 65
Symptom | Suggestion |
The handset or the base can’t | • Make sure that more than 3 handsets (or 2 handsets when the base is used |
join the conversation. | for the conference) are not in use. |
| • When recording a conversation, the 2nd handset (or the base) cannot join |
| the conversation. |
The answering system | • Make sure the base unit is plugged in. |
does not work. | • Make sure that the answering system is turned On. |
| • Make sure that the message record time is not set to Announce only |
| (see page 47). |
Messages are incomplete. | • The incoming messages may be too long. Remind callers to leave a |
| brief message. |
| • The memory may be full. Delete some or all of the saved messages. |
After a power failure, the | • Record your greeting again. The default message should remain. |
outgoing message is deleted. |
|
No sound on the base unit | • Adjust the speaker volume on the base unit. |
speaker during call monitoring | • Make sure the call screen feature is set to On. |
or message playback. |
|
Cannot access remote | • Make sure you are using the correct PIN number. |
features from another | • Make sure that the |
for at least two seconds. If it cannot, you may have to use another phone | |
| to access your phone. |
Time stamp cannot be heard. | • Make sure you have set the time (see “Setting Day and Time” on page 21 |
| or “Setting the Time” on page 45). |
If you still have a problem. | • Check our web site for the latest information and frequently asked questions. |
| www.uniden.com.au |
| www.uniden.co.nz |
|
|
| [ 65 ] |