Uniden BC60XLT manual Setup, Power, Open cover Insert batteries Replace cover

Page 9

Setup

Power

Installing Batteries

1. Open cover.

2. Insert batteries

3. Replace cover.

IMPORTANT

If you are installing Alkaline Batteries, set the switch to “Reg. Alk BATT.” If installing Nickel-Cadmium Batteries, set the switch to “Ni-Cd BATT.”

WARNING! Do not mix Alkaline Batteries with Nickel-Cadmium Batteries. Be sure to install four Batteries of the same type.

6

Image 9

Contents BC60XLT Page Controls Table of Contents Feature Highlights What is Scanning?About Your New BC60XLT Frequency Range Transmission Types of CommunicationIncluded with the BC60XLT Where to Obtain More Information Setup PowerOpen cover Insert batteries Replace cover AC Adapter/Charger Mounting the Flexible Antenna Installing the Belt ClipOperation KeylockKeylock prevents accidental key entries To lock To unlock Programming Channels Select frequency Select channel using Manual modeEnter frequency 3a. If frequency outside range Recheck frequency How Squelch Works Scanning Programmed Channels Setting the SquelchTurn until hiss heard Turn just until hiss stops Turn the scanner onWhen transmission received To hold on that channel To listen to or program a specific channel To resume scanningChannel Lockout Scanning Mode To unlock a channel To scan weather channels Scanning Weather ChannelsTo resume normal scanning To review the weather frequencyCare and Maintenance Optional Accessories Replacement Parts Condition Suggestion Operating TipsCondition Suggestion Frequency Coverage Technical SpecificationsOne Year Limited Warranty Covered Under ONE or More of the Following U.S. Patents