Uniden BC60XLT manual Mounting the Flexible Antenna Installing the Belt Clip, AC Adapter/Charger

Page 10

AC Adapter/Charger

Use the included AC Adapter/Charger to power the BC60XLT from an AC

source.

The AC Adapter/

Charger also recharges Nickel-Cadmium Batteries while they are installed in the scanner.

WARNING! Do not charge Alkaline Batteries in this scanner. Doing so may cause serious damage to the product and void the warranty. Before attempting to recharge Batteries, make sure you have installed four rechargeable Nickel-Cadmium Batteries and the selector switch is set to “Ni-Cd” .

Mounting the Flexible Antenna

Installing the Belt Clip

CAUTION: Do not tighten the screws too tight. You could damage the case or clip.

7

Image 10

Contents BC60XLT Page Controls Table of Contents What is Scanning? Feature HighlightsAbout Your New BC60XLT Types of Communication Frequency Range TransmissionIncluded with the BC60XLT Where to Obtain More Information Power SetupOpen cover Insert batteries Replace cover Mounting the Flexible Antenna Installing the Belt Clip AC Adapter/ChargerKeylock OperationKeylock prevents accidental key entries To lock To unlock Select frequency Select channel using Manual mode Programming ChannelsEnter frequency 3a. If frequency outside range Recheck frequency How Squelch Works Turn until hiss heard Turn just until hiss stops Setting the SquelchScanning Programmed Channels Turn the scanner onWhen transmission received To hold on that channel To resume scanning To listen to or program a specific channelChannel Lockout Scanning Mode To unlock a channel Scanning Weather Channels To scan weather channelsTo review the weather frequency To resume normal scanningCare and Maintenance Optional Accessories Replacement Parts Operating Tips Condition SuggestionCondition Suggestion Technical Specifications Frequency CoverageOne Year Limited Warranty Covered Under ONE or More of the Following U.S. Patents