Uniden UBC 2500XLT manual Frequency. To store the same frequency into

Page 13

LIMIT KEY

STEP KEY

ENTERKEY

SEARCH KEY

HOLD KEY

AUTO KEY

This key has two functions in Search Mode:

(a)to step down a frequency; and (b) to set the search band limits. To manually step down, press and hold [LMT]. Press and hold for more than one second to rapidly move down the frequencies.

To set the lower and upper limits of the search band, first enter the number for the

lower limit and press [LMT]. Then enter the number for the upper limit and press [LMT].

Use [STP] to change the step increment when accessing frequencies. Press [STP] to change thE;factory preset auto step to 5 kHz, I 12.5 kHz, 25 kHz, or 50 kHz, or press [.]

twice to reset back to auto steps. (The selected step setting appears on the display.)

(Within the numeric keypad) Press [E] to

store a displayed fre_quency into any displayed channel. Note: If you try to store

the same frequency into another channel, the display will show the original channel for that

frequency. To store the same frequency into

the selected channel, press [E] again.

Press [SRC] to start searching for active frequencies within preset ranges of any band. Normally, the search continues from the frequency where it left off in the previous search. The scanner will automatically start searching upward from the lowest frequency

of its band. ("SRCH" appears on the display in Search Mode.)

During Search, you can press [LMT] to hold the displayed frequency, and press [LMT] again to manually step down a frequency, or

press [HLDl to manually step u~a frequency. ~ress and hold [LMTj or [HLD] to rapidly step through the frequencies.

Press [HLD in Search Mode to stop searching. 'HOLD"appears on the display.)

Press [HLD ~ again to step up one channel. Press and hold[HLD] for more than 1 second to rapidly move through the frequencies. In Hold Mode, press [LMT] to STEP DOWN to the next lower fre9..uency. To resume the search, press [SRCj.

Use [AUTO] to automatically store active frequencies Into open (empty) channels of

specified banks. To use Auto Store, first set the upper and lower limits of the band to be

searched. In Search Mode, press [AUTO] to activate the Auto Store feature. Press the

numeric key(s) for the bank(s) to store the frequencies. ("AUTd'appears on the display

11

Page 12 Page 14
Image 13
Page 12 Page 14
Contents USC 2500XL T This equipment contains a Nickel-Cadmium PrecautionsTable of Contents About Your New UBC 2500XLT Leather-like Carrying Case UnpackingAuto Store Automatically stores all active frequencies Weather Channels Lets your scanner function as aAustralia TopView Controls and IndicatorsFrontView Scan KEY @ @4 Display. Note Youcannotdeactivateall20 banks LMTLIntKV Frequency. To store the same frequency into Send KEY Hold UO WX 1 2 KHz AM NFM WFM IkeylockiSetup Mounting the Flexible Antenna Installing the Belt ClipBank Scan If you have programmed channels, you Scanning OverviewBand Search The Search function is different from 0 5 Programming ChannelsThen, press Manual ProgrammingWith the Rotary Tuner If the selected channel already has a stored Frequency Example Set search limits of 137.000 to 144.000 MHz Ress Manual to stop scanningPress SRC to start the search HLD to stay on that frequencyPress Manual to stop scanning Auto Store feature automatically stores all activeFirst enter the lower limit by pressing 4 0 0 Press LMTDisplay. In this case, select another bank ~nother Open ChannelPress E Current channel is erased, and the display shows Deleting a Stored FrequencyPress Manual again Scann ingWeather Channel Scanning Customizing Scanner Operation Press Scan to start scanning This feature is active in Manual Mode or Scan ModeSetting Up Priority Channels To activate the Count feature Using Count to Monitor Channel ActivityTurn the scanner off before removing the Battery Pack Care and MaintenanceEvent of memory loss. If memory is lost, simply Reprogram each channelDo not use excessive amounts of water Clean the outside of the scanner with a mild detergentProblem TroubleshootingSearch Band Technical SpecificationsDisplay 137 174 222 400 520Warranty Unid~n~GP

UBC 2500XLT specifications

The Uniden UBC 2500XLT is a versatile and robust handheld scanner that has garnered a reputation among radio enthusiasts and professionals alike. Known for its advanced scanning capabilities, this model is designed to provide users with comprehensive access to various radio communications, making it an essential tool for both hobbyists and law enforcement personnel.

One of the standout features of the UBC 2500XLT is its wide frequency range. It is capable of tuning into VHF, UHF, and even some aircraft bands, covering a spectrum from 25 MHz to 1.3 GHz. This extensive range allows users to monitor an array of radio signals, including public safety communications, amateur radio, and other interesting transmissions.

The scanner employs Advanced Trunking Technology, enabling users to listen to trunked radio systems. This technology is crucial in modern communication systems, where multiple conversations can occur over a shared channel. The UBC 2500XLT can decode and track these trunked signals, ensuring that users do not miss important radio traffic.

Another notable characteristic of the UBC 2500XLT is its memory capacity. With 1000 memory channels available, users can store a significant amount of frequencies for quick access. It also features 10 banks for organizing these channels, helping users to categorize and manage their preferred frequencies efficiently.

Ease of use is another hallmark of the UBC 2500XLT. The scanner comes equipped with a large LCD display, providing clear visibility of the current frequency and other relevant information. The keypad is user-friendly, allowing for straightforward programming of channels and features. Additionally, the device includes a built-in scanner setup function, simplifying the process for beginners.

The UBC 2500XLT also boasts an impressive rechargeable battery, providing extended use without the need for frequent recharges. This aspect makes it ideal for outdoor activities or fieldwork, where access to power sources might be limited.

In summary, the Uniden UBC 2500XLT is a powerful handheld scanner that combines advanced technology with user-friendly features. Its wide frequency coverage, trunking capabilities, substantial memory, and ease of use make it a prime choice for anyone looking to explore the world of radio communications. Whether for hobby or professional use, the UBC 2500XLT stands out as a reliable tool in the scanner market.
Top Page Image Contents