Uniden UBC 2500XLT Care and Maintenance, Turn the scanner off before removing the Battery Pack

Page 31

Care and Maintenance

Replacing the Rechargeable Battery Pack

When it is time to install a new Battery Pack, use only the one made for this scanner. Any other type of battery may damage

yourunit.

To replace the Battery Pack:

1.Remove the BeltClipby liftingthe tab and carefully sliding it upward and out.

2.Remove the Battery Pack by pressing in and slidingit down and off.

3.Install the new Battery Pack by sliding the pack onto the bottom of the scanner until it clicks.

4.Replace the Belt Cljp.

Note: Be sure to recharge the Battery Pack before using the scanner.

Battery Maintenance

Most rechargeable batteries typically suffer from "memory

effect"which occurs graduallyover time, shortening the usable time of the Battery Pack when it is fully charged. After 2 to 3 months of use, when the Battery Pack holds a charge for a somewhat shorter period than when first used, follow these steps:

1.

Leave the scanner on until the Battery Pack is drained.

 

 

(See the Low Battery Indicator description in the

 

 

"Controls and Indicators"section for more information.)

 

2.

Recharge the Battery Pack for 14 to 16 hours to ensure

 

 

a full charge.

 

3.

After the Battery Pack is fully recharged, you may need

I

 

to reprogram the channels.

General Use

. Turn the scanner off before removing the Battery Pack.

.

Always write down the programmed frequencies in the

 

event of memory loss. If memory is lost, simply

 

reprogram each channel.

.

Always press each keypad button firmly until you hear

 

the entry tone for that key entry.

29

Page 30 Page 32
Image 31
Page 30 Page 32
Contents USC 2500XL T This equipment contains a Nickel-Cadmium PrecautionsTable of Contents About Your New UBC 2500XLT Leather-like Carrying Case UnpackingAuto Store Automatically stores all active frequencies Weather Channels Lets your scanner function as aAustralia TopView Controls and IndicatorsFrontView Scan KEY @ @4 Display. Note Youcannotdeactivateall20 banks LMTLIntKV Frequency. To store the same frequency into Send KEY Hold UO WX 1 2 KHz AM NFM WFM IkeylockiSetup Mounting the Flexible Antenna Installing the Belt ClipBank Scan If you have programmed channels, you Scanning OverviewBand Search The Search function is different from 0 5 Programming ChannelsThen, press Manual ProgrammingWith the Rotary Tuner If the selected channel already has a stored Frequency HLD to stay on that frequency Ress Manual to stop scanningExample Set search limits of 137.000 to 144.000 MHz Press SRC to start the search4 0 0 Press LMT Auto Store feature automatically stores all activePress Manual to stop scanning First enter the lower limit by pressingDisplay. In this case, select another bank ~nother Open ChannelPress E Current channel is erased, and the display shows Deleting a Stored FrequencyPress Manual again Scann ingWeather Channel Scanning Customizing Scanner Operation Press Scan to start scanning This feature is active in Manual Mode or Scan ModeSetting Up Priority Channels To activate the Count feature Using Count to Monitor Channel ActivityReprogram each channel Care and MaintenanceTurn the scanner off before removing the Battery Pack Event of memory loss. If memory is lost, simplyDo not use excessive amounts of water Clean the outside of the scanner with a mild detergentProblem Troubleshooting137 174 222 400 520 Technical SpecificationsSearch Band DisplayWarranty Unid~n~GP

UBC 2500XLT specifications

The Uniden UBC 2500XLT is a versatile and robust handheld scanner that has garnered a reputation among radio enthusiasts and professionals alike. Known for its advanced scanning capabilities, this model is designed to provide users with comprehensive access to various radio communications, making it an essential tool for both hobbyists and law enforcement personnel.

One of the standout features of the UBC 2500XLT is its wide frequency range. It is capable of tuning into VHF, UHF, and even some aircraft bands, covering a spectrum from 25 MHz to 1.3 GHz. This extensive range allows users to monitor an array of radio signals, including public safety communications, amateur radio, and other interesting transmissions.

The scanner employs Advanced Trunking Technology, enabling users to listen to trunked radio systems. This technology is crucial in modern communication systems, where multiple conversations can occur over a shared channel. The UBC 2500XLT can decode and track these trunked signals, ensuring that users do not miss important radio traffic.

Another notable characteristic of the UBC 2500XLT is its memory capacity. With 1000 memory channels available, users can store a significant amount of frequencies for quick access. It also features 10 banks for organizing these channels, helping users to categorize and manage their preferred frequencies efficiently.

Ease of use is another hallmark of the UBC 2500XLT. The scanner comes equipped with a large LCD display, providing clear visibility of the current frequency and other relevant information. The keypad is user-friendly, allowing for straightforward programming of channels and features. Additionally, the device includes a built-in scanner setup function, simplifying the process for beginners.

The UBC 2500XLT also boasts an impressive rechargeable battery, providing extended use without the need for frequent recharges. This aspect makes it ideal for outdoor activities or fieldwork, where access to power sources might be limited.

In summary, the Uniden UBC 2500XLT is a powerful handheld scanner that combines advanced technology with user-friendly features. Its wide frequency coverage, trunking capabilities, substantial memory, and ease of use make it a prime choice for anyone looking to explore the world of radio communications. Whether for hobby or professional use, the UBC 2500XLT stands out as a reliable tool in the scanner market.
Top Page Image Contents