Uniden BC45XLT manual Locking a Channel While Scanning, Lockout Tips

Page 18

Locking a Channel While Scanning

If the scanner keeps stopping on a particular channel due to noise or too frequent transmissions, you may want to prevent the channel from being in the scanning sequence.

1. Wait until the scanner stops at the channel.

2. Then press .

3. The scanner immediately resumes scanning because the locked out channel is no longer in the scanning sequence.

Lockout Tips

To quickly lockout a series of channels, start with the lowest number channel.

For example, if you are locking out channels 4, 7, 8, 12,

and 15, start with Channel 4. After selecting channel 4,

press . Then press one or more times to step up to the next channel to be locked out.

Record the locked-out channels in some convenient place so you can restore them.

14

Image 18
Contents BC45XLT Function Keys Controls and Indicators 17 18 19 20Precautions Earphone WarningContents What is Scanning? What is Chain Searching?Introduction Types of Communications Frequency Range TransmissionFeature Highlights Where to Obtain More Information Included with Your Scanner Setup Installing the BatteriesLow Battery Indication Squelch Function Basic OperationTurn the Scanner On Key LockProgramming Duplicate Frequency Alert Programming TipsScanning Lockout in Manual Mode Channel LockoutLocking a Channel While Scanning Lockout TipsRestore a Locked Out Channel Restore All Locked-out ChannelsPriority Scan Changing the Priority Channel Setting a Search Range Chain SearchPage Search Hold Feature Chain Search ON/OFFChannel Skip Storing Search Frequencies Page Weather Scan General Use Care and MaintenanceCleaning LocationRepairs BirdiesTroubleshooting Problem SuggestionSpecifications Frequency RangeAccessories and Replacement Parts ONE-YEAR Extended Warranty Other patents pending Uniden America Corporation