Storing Search Frequencies
You can quickly store any frequency you find during Search.
Caution: You must determine the channel in which you will store the frequency before entering the search mode. Otherwise, you may erase a stored frequency that you want to keep.
1. Press 
.
2.Select a channel.
a.Enter the channel number.
b.Then press 
again.
– OR –
Press ▲,▼, or 
repeatedly until the channel number appears in the display.
b | a |
3.Select one or more of the personal search bands.
For example, select CHAIN 2.
Note: These frequencies were used during “Setting a Search Range,” on page 18.
4. Press 
.
5. When the scanner stops at the frequency you want, press
either 
or 
.
Note: After this step you are in search Hold mode. Press 
to resume scanning.
22