Chain Search
Use Chain Search to find active frequencies in your area. You can search all five personal bands at once or turn off those bands you don’t want to hear. This gives you flexibility of searching for any channel between 29 and 512 MHz, as long as they are within the 10 frequencies bands covered by the BC45XLT. See the table on page 3, the Technical Specifications on page 28, or the table on the back of the BC45XLT.
Setting a Search Range
An error message displays when 
is pressed and you have not
either specified a search range in at least one Chain Search band.
– OR –
If you attempt to turn off all
Personal Chain Search bands.
The Error message turns off.
Press 
to select the band you want to program.
To program a frequency range into one of the five personal Chain Search bands, follow these steps:
1. Press 
until the search location you want appears in the display.
2.Enter lower limit of the search band.
a.Enter the frequency number.
b.Then press 
.
a |
b |
18