Uniden owner manual BC92XLT Paper OM.fm Page 39 Tuesday, August 24, 2004 356 PM

BC92XLT Paper OM.fm Page 39 Tuesday, August 24, 2004 3:56 PM

If you selected C-C.Alt, skip to Step 5. If you selected C-C.PS, skip to Step 7.

3.Repeatedly press or until the band you want to search appears, then press E to select it. Otherwise, press if you do not want to select it.

The scanner displays the following options.

Lo On or Lo OFF: Lets you select the VHF Lo frequency band.

Air On or Air OFF: Lets you select the Air frequency band.

Hi On or Hi OFF: Lets you select the VHF Hi frequency band.

UHF On or UHF OFF: Lets you select the UHF frequency band.

800On or 800 OFF: Lets you select the 800 MHz frequency band.

4.Repeatedly press or until the option you want appears, then press E to select it. Otherwise, press if you do not want to select it. Then skip to Step 9.

5.Press E while C-C.Altappears. One of the following alert options appears.

ALt bEEP: The scanner beeps when a Close Call signal is detected.

ALt Light: The scanner flashes the display backlight when a Close Call signal is detected.

ALt bP-Lt: The scanner flashes the display backlight and beeps when a Close Call signal is detected.

ALt OFF: The scanner does not provide any alert when a Close Call signal is detected.

Special Features

39