BC92XLT Paper OM.fm Page 42 Tuesday, August 24, 2004 3:56 PM
Press
At least one search bank must be enabled. (The scanner sounds an error tone if you try to disable all the search banks). The search bank and the frequency where chain search starts depends on how the scanner was set before you selected chain search mode.
Chain Search Hold Mode
To start chain search hold mode, press Hold in chain search mode. The scanner stops searching and Hold appears. In this mode, pressing
Func + 
changes the search direction downward and pressing Func + 
changes the search
direction upward. 
or 
appears according to the current search direction.
Storing Frequencies Found During Chain Search into Channel Memory
You can store frequencies you find in chain search mode or chain search hold mode.
1.Press Func + Pgm in chain search mode or chain search hold mode. The lowest blank channel and bank appear.
2.Press E to store the frequency into the blank channel. To select another channel, press Func + 
or Func + 
before you press E. You can also press
If you try to save a frequency that is already stored, the scanner sounds an error tone and displays the channel that was duplicated. If you entered the fre- quency by mistake, press 
. To enter the frequency anyway, press E to accept.
Special Features
42