BC92XLT Paper OM.fm Page 40 Tuesday, August 24, 2004 3:56 PM
6.Repeatedly press 
or 
until the option you want appears, then press E to select it. Otherwise, press 
if you do not want to select it. Then skip to Step 9.
7.Press E while
PS On: The scanner ignores hits on common pager frequencies.
PS OFF: The scanner alerts you when it receives hits on common pager frequencies.
8.Repeatedly press 
or 
until the option you want appears, then press E to select it.
9.When you select the option, press Scan to start Close Call search. Otherwise, to continue normal scanning, repeatedly press Func until F disappears then press Scan.
Using Close Call RF Capture
To turn on the Close Call feature, press Func + 
once except in WX search, band select, or program
mode. 
appears. Every 2 seconds, the scanner checks for frequencies in the range you specified in “Setting the Close Call Options” on Page 38.
Notes:
•Set the squelch tight (where only strong signals are received) while using Close Call.
•To continue scanning normally while the Close Call feature is working, simply press Scan twice.
When the scanner finds a frequency, it sounds the alert you specified in “Setting the Close Call Options” on Page 38, and Found flashes. Press any key to confirm the displayed frequency. Press Scan to resume scanning. Or press 
or 
while the frequency and 
appear to select the band where you are searching.
Special Features
40