Wasp Bar Code CCD Scanner manual EAN-13 Settings

Page 29

EAN-13 SETTINGS

Chapter 5

The EAN/JAN-13 (European Article Number/Japanese Article Number) is fixed length and is similar to the UPC-A symbology, but encodes a 13th digit. The nominal height for the EAN/JAN-8 barcode is one inch. The reduced size is 80% of the nominal size.

EAN-13 Enable *

EAN-13 Disable

Send Leading Digit *	Do Not Send
	Leading Digit

Send Check Digit *	Do Not Send
	Check Digit

ISBN Enable

ISBN Disable *

ISSN Enable

ISSN Disable *

*Default

Image 29

Contents Programming Guide CCD Scanner Programming Guide Table of Contents Introduction Barcode Symbologies WCS3900 PS2 Scanner InstallationQuick Start To change Minimum/Maximum Length Setup & ConfigurationChapter Beep Settings Interblock Delay UPPER/LOWER Case Keyboard Language PREAMBLE/POSTAMBLE Configuration Terminator ENABLE/DISABLE Barcode Symbologies EnableENABLE/DISABLE Barcode Symbologies Code 39 Settings Interleaved 2 of 5 and Code 93 Settings Disable Code Code 128 and UCC/EAN 128 SettingsMSI Plessey Settings Codabar Settings UPC-A Settings UPC-A Supplement Settings / UPC-A to EAN-13 UPC-E Settings UPC-E Supplement Settings EAN-8 Settings EAN-8 Supplement Settings EAN-13 Settings EAN-13 Supplement Settings Barcode Test Symbols Appendix a Appendix a Barcode Test Symbols EAN/JAN-13 Appendix B Appendix B Eps DEL Appendix C Function Code for PC Optical Technical Specifications Appendix DWarranty Information FAQ Product Support Wasp Barcode Technologies Wasp Barcode Technologies