Wasp Bar Code CCD Scanner manual Chapter

Page 9

FACTORY DEFAULT & KEYBOARD CONNECTION

Chapter 5

Factory Default

Use the Factory Default barcode to reset the scanner to the Default settings.

Factory Default

Continuous Mode

Scan this continuous scan mode barcode to enable continuous scanning. This feature allows the scanner to be used with a stand for hands free scanning. The trigger is functionless in this mode. To turn this mode off scan the default barcode above.

Continuous Scan Mode Enable

Keyboard Connection

The Keyboard Connection is used to program the Wasp WCS3900 Series scanner for the type of host computer.

PC (USB or PS/2) *

N o t e b o o k

*Default

7

Image 9
Contents Programming Guide CCD Scanner Programming Guide Table of Contents Introduction Barcode Symbologies WCS3900 PS2 Scanner InstallationQuick Start To change Minimum/Maximum Length Setup & ConfigurationChapter Beep Settings Interblock Delay UPPER/LOWER Case Keyboard Language PREAMBLE/POSTAMBLE Configuration Terminator ENABLE/DISABLE Barcode Symbologies EnableENABLE/DISABLE Barcode Symbologies Code 39 Settings Interleaved 2 of 5 and Code 93 Settings Disable Code Code 128 and UCC/EAN 128 SettingsMSI Plessey Settings Codabar Settings UPC-A Settings UPC-A Supplement Settings / UPC-A to EAN-13 UPC-E Settings UPC-E Supplement Settings EAN-8 Settings EAN-8 Supplement Settings EAN-13 Settings EAN-13 Supplement Settings Barcode Test Symbols Appendix a Appendix a Barcode Test Symbols EAN/JAN-13 Appendix B Appendix B Eps DEL Appendix C Function Code for PC Optical Technical Specifications Appendix DWarranty Information FAQ Product Support Wasp Barcode Technologies Wasp Barcode Technologies