Wadia Digital 27i operation manual Factory Setting

Page 20

Each digital input on the Wadia 27i can be configured as either ClockLink On or ClockLink Off.

Clocklink On: Should be used only with ClockLink sources, such as the Wadia 27i.

ClockLink Off: Should be used with all non-ClockLink sources.

To change the ClockLink configuration for any input, press the Enter key repeatedly until the Configure ClockLink Screen for the desired input is displayed. The picture below shows the Configure ClockLink Screen for Input 2 showing Clocklink On.

Using the Volume Up or Volume Down key, select the desired setting

FACTORY SETTING

As delivered from the factory, Input 1 is configured with ClockLink On. All other inputs are configured for ClockLink Off.

Image 20
Contents D I N G M P U T E R Page Page Page Page Page Digital Page Using AC Line Conditioners Page Page ~~~~~~~~~~~~ ~.............* ...... ..&$ Page J4+ Play J4+ Play Page Page Entering Configuration Mode Factory Setting Factory Setting Page Resetting Configurations LOCK-UP Page Warranty Page Page Wadia Digital Corporation