SMC Networks 10/100/1000 SMCGS8P-Smart manual Setting the IP Address

BASIC CONFIGURATION

CLI – Specify the hostname, location and contact information.

Console(config)#hostname Test Switch			3-29
Console(config)#snmp-server location TPS - 3rd Floor			3-66
Console(config)#snmp-server contact Chris			3-66
Console#show system			3-52
System description: SMC	Networks SMC8612T
System OID string: 1.3.6.1.4.1.1991.1.5.1.1.4.1.1
System information
System Up time: 0 days, 2 hours, 4 minutes, and 7.13 seconds
System Name	: Test Switch
System Location	: TPS - 3rd Floor
System Contact	: Chris
MAC address	: 00-30-f1-47-58-3a
Web server	: enable
Web server port	: 80
Web secure server	: enable
Web secure server port	: 443
POST result
--- Performing Power-On	Self Tests (POST)	---
UART Loopback Test		PASS
Timer Test		PASS
DRAM Test		PASS
I2C Initialization		PASS
Runtime Image Check		PASS
PCI Device Check		PASS
Switch Driver Initialization		PASS
Switch Internal Loopback Test		PASS
------------------- DONE	--------------------
Console#

Setting the IP Address

An IP address may be used for management access to the switch over your network. By default, the switch uses DHCP to assign IP settings to VLAN 1 on the switch. If you wish to manually configure IP settings, you need to change the switch’s user-specified defaults (IP address 0.0.0.0 and netmask 255.0.0.0) to values that are compatible with your network. You may also need to a establish a default gateway between the switch and management stations that exist on another network segment.

2-11