SMC Networks 10/100/1000 SMCGS8P-Smart L, I, 3-88, parity

C OMMAND L INE I NTERFACE
3-88
Command Mode
Line Configuration
Command Usage
The databits command can be used to mask the high bit on
input from devices that generate 7 data bits with parity. If parity
is being generated, specify 7 data bits per character. If no parity
is required, specify 8 data bits per character.
Example
To specify 7 data bits, enter this command:
Related Commands
parity (3-88)
parity
Use this command to define generation of a parity bit. Use the no
form to restore the default setting.
Syntax
parity {none | even | odd}
no parity
•none - No parity
•even - Even parity
•odd - Odd parity
Default Setting
No parity
Command Mode
Line Configuration
Console(config-line)#databits 7
Console(config-line)#
b_mgmt.book Page 88 Tuesday, July 8, 2003 5:24 PM