SMC Networks 10/100/1000 SMCGS8P-Smart manual Secure Shell Commands

COMMAND LINE INTERFACE

Command	Function	Mode	Page
ip http server	Allows the switch to be monitored or	GC	3-34
	configured from a browser
ip http	Enables the HTTPS server on the switch	GC	3-35
secure-server
ip http	Specifies the UDP port number used for	GC	3-36
secure-port	HTTPS connection to the switch’s Web
	interface
Secure Shell Commands
ip ssh server	Enables the SSH server on the switch	GC	3-38
ip ssh	Specifies the authentication timeout for	GC	3-37
	the SSH server and the number of retries
	allowed by a client
disconnect ssh	Terminates an SSH connection	PE	3-39
show ip ssh	Displays the status of the SSH server and	PE	3-40
	the configured values for authentication
	timeout and retries
show ssh	Displays the status of current SSH	PE	3-40
	sessions
Event Logging Commands
logging on	Controls logging of error messages	GC	3-41
logging history	Limits syslog messages sent to the SNMP	GC	3-42
	network management station based on
	severity
logging host	Adds a syslog server host IP address that	GC	3-44
	will receive logging messages
logging facility	Sets the facility type for remote logging	GC	3-45
	of syslog messages
logging trap	Limits syslog messages saved to a remote	GC	3-45
	server based on severity
clear logging	Clears messages from the logging buffer	PE	3-47
show logging	Displays the state of logging	PE	3-47

3-28