VIPowER VP-6024, VP-6049 Assemble CD-ROM Box with CD-ROM Drive, CD-ROM Box Enclosure Components

Page 5

Top Cover (Note alignment flanges)

Connectors/Fan

End-Panel

Bottom Cover (Note cut-out for flange)

Retaining Screws (x4)

Vertical-Holder Stand (Optional)

Rubber Stands (x4)

Drive Rails

CD-ROM Box Enclosure Components

1.Attach the two connectors from the end-panel assembly to the appropriate connectors on the CD-ROM drive.

End-Panel	40-pin IDE
Assembly	Data Connector

CD-ROM

Drive

Pin-1 Colored

Stripe

4-pin Power

Connector

CD-ROM Box Enclosure Installation Guide

Image 5

Contents CD-ROM Box Enclosure Table of Contents Introduction CD-ROM Box Enclosure Features InstallationUnpacking Your CD-ROM Box Disassemble the CD-ROM BoxCD-ROM Box Enclosure Components Power and Data Connector Drive ConnectionsAssemble CD-ROM Box with CD-ROM Drive Installing Covers and Rubber Stands CD-ROM Box Enclosure with Vertical-Holder Stand Assembled CD-ROM Box EnclosureOperation with a Docking Kit Using the +5V/+12V AC/DC Power AdapterFor models with Power Select switch Connections with Docking Unit for Operation Disconnecting the CD-ROM BoxDevice is now ready to use